Honeycomb ceramics can be made from a variety of materials. The main materials are: cordierite, mullite, aluminum titanate, activated carbon, silicon carbide, activated alumina, zirconia, silicon nitride, cordierite-mullite, cordierite-aluminum titanate and other composite matrices.
After activated carbon powder or granules are made into honeycomb ceramic shapes, the water purification and wastewater treatment capabilities are greatly improved, especially in the pharmaceutical industry for dehydration, decolorization and impurity removal of antibiotics, hormones, vitamins, nucleic acid injections and various injections, drugs, etc.
Honeycomb ceramics can be divided into four categories according to their uses: regenerators, fillers, catalyst carriers and filter materials.
The heat capacity of the honeycomb ceramic regenerator is more than 1000kJ/kg, and the maximum operating temperature of the product is ≥1700°C. It can save more than 40% of fuel in heating furnaces, bakers, soaking furnaces, cracking furnaces and other kilns, and increase output by more than 15%. , the exhaust gas temperature is lower than 150℃.
Honeycomb ceramic fillers have the advantages of larger specific surface area and better strength than other shaped fillers. They can make the vapor and liquid distribution more even, reduce the bed resistance, have better effects, and extend the service life. They are widely used in the petrochemical, pharmaceutical and fine chemical industries. The filler effect is quite good.
Honeycomb ceramics have more advantages when used as catalysts. It uses honeycomb ceramic material as the carrier, adopts unique coating materials, and is prepared with precious metals, rare earth metals and transition metals. Therefore, it has the advantages of high catalytic activity, good thermal stability, long service life, high strength and other advantages.
Honeycomb ceramics for catalytic cracking are replacing existing products. Catalytic cracking uses heavy distillate oil between 200 and 500°C as raw material (including vacuum fraction, straight-run light diesel oil, coked wax oil, etc.), uses aluminosilicate as the catalyst, and the reaction temperature is between 450 and 550°C ( Varies with reactor type). It has large output (each large-scale catalytic cracking unit cracks more than one million tons of oil every year) and high technical requirements (for example, the catalyst must be regenerated every few minutes or even seconds every time it contacts the oil, and the catalyst flows through the fluidized bed every minute. Up to 10t or more) As the catalytic activity increases, more stringent regeneration conditions are required in order to speed up the regeneration speed. For example, at temperatures between 600 and 650°C, or even 700°C, catalyst consumption is large, with 0.3 to 0.6kg of catalyst consumed per ton of feed oil. Catalysts with poor mechanical strength consume much more. This requires a slight improvement in catalyst activity, selectivity, and stability, which will be of great significance to actual production. Because of this, honeycomb ceramic catalysts are constantly introducing new ones, and the market demand is also increasing. These catalysts for catalytic cracking are replaced by honeycomb ceramic catalysts. Honeycomb ceramic catalysts with large size and porous number have emerged and have strong development momentum.
As a filter material, honeycomb ceramics have the following advantages: good chemical stability, resistance to acids, alkalis and organic solvents; excellent resistance to rapid heat and cooling, with working temperatures up to 1000°C; good antibacterial properties, not easily degraded by bacteria, not easily clogged and easily Regeneration; strong structural stability, narrow pore size distribution, high permeability; non-toxic, especially suitable for food and drug processing.






