Pingxiang Zhongci Environmental Ceramics Material Co.,Ltd.

4A Molecular Sieve Adsorbent

4A Molecular Sieve Adsorbent

4A Molecular Sieve, is an alkali alumina silicate. It is the sodium form of the type A crystal structure. It has an effective pore opening of about 4 angstroms (0.4nm). It will adsorb most molecules with a kinetic diameter of less than 4 angstroms and exclude those larger.
Send Inquiry
Description
Technical Parameters

 

Products Introduction

 

4A Molecular Sieve, is an alkali alumina silicate. It is the sodium form of the type A crystal structure. It has an effective pore opening of about 4 angstroms (0.4nm). It will adsorb most molecules with a kinetic diameter of less than 4 angstroms and exclude those larger.

 

Chemical formula: Na2O . Al2O3 . 2SiO2 . 4.5 H2O

Si/al ratio: SiO2/Al2O3≈2

Application: Mainly used for drying natural gas and various chemical gases and liquids, refrigerants, pharmaceuticals, electronic materials and volatile substances, argon purification, methane, ethane, propane separation.

 

Chemical Composition

 

Nominal pore diameter

4 angstroms

Shape

Sphere

Pellet

Diameter

1.7-2.5 (mm)

3.0-5.0 (mm)

1.6 (mm)

3.2 (mm)

8*12 (mesh)

4*8 (mesh)

1/16 (inch)

1/8 (inch)

Bulk density (g/ml)

≥0.70

≥0.70

≥0.68

≥0.68

Crushing strength (N/PC)

≥35.0

≥80.0

≥30.0

≥70.0

Size ratio up to grade (%)

≥98.0

≥98.0

≥96.0

≥96.0

Static H2O adsorption (%)

≥21.5

≥21.5

≥21.5

≥21.5

H2O content (%)

≤1.5

≤1.5

≤1.5

≤1.5

Wear ratio (%)

≤0.40

≤0.40

≤0.40

≤0.40

 

Regeneration

 

1. Remove water: depending on the pressure, temperature, water content. Under normal circumstances, the dry gas at 200~350℃ passes through the molecular sieve bed for 3~4 hours at a pressure of 0.3~0.5kg/cm2 to cool the outlet temperature to 110~180℃.

2. Decaying organic matter: replace organic matter with water vapor, and then remove water.

 

Stockpile

 

Room temperature, relative humidity not more than 90%; Avoid direct exposure to air; Avoid water, acids and alkali.

Packing: 25KG cardboard drum or bag.

Specific to customer requirements.

 

Matters need attention

 

Do not open the package before use to avoid dampness and affect the adsorption effect.

 

Hot Tags: 4a molecular sieve adsorbent, China 4a molecular sieve adsorbent manufacturers, factory, Carbon Molecular Sieve CMS, Silica Gel, Molecular Sieve, 3A Molecular Sieve, PSA Oxygen Generator Concentrator 13X HP Molecular Sieve, 13X APG Zeolite Molecular Sieve for PSA Device