Products Introduction
The metal corrugated plate packing is formed by wire mesh with pores on the surface. Compared with other packings, the metal mesh packing has lower pressure and lower liquid holding capacity. Due to the unique capillary action of the metal mesh, the corrugation directions of two adjacent sheets are opposite. When the packing enters the tower, the upper and lower packing discs intersect at 90°, which greatly increases the wettable area and improves the separation efficiency. High efficiency, small pressure drop, large flow. Enhances uniform liquid distribution and surface wetting capabilities, resulting in improved mass transfer efficiency. The unit height of each roll is 50-200mm, and when the diameter is greater than 1.5m, it is packed in blocks. It is mostly used for vacuum distillation, atmospheric distillation and absorption of difficult-to-separate or heat-sensitive substances.
Wire Gauze Packings – Woven Meshes for High Separation Efficiency
Metal wire gauze structured packing is an important milestone of the development of clear and neat filling. This kind of filling consists of arranged wire mesh pieces pressed into corrugation. Obliquity of corrugation is 45° or 60° and the neighbor two pieces are of opposite directions. When filling into the column, upper and lower filling trays cross by 90. It has advantages of high effectiveness, low pressure drop and large flow rate. This product includes BX, CY types, generally used in vacuum distillation, normal pressure distillation and absorption processes of matters hard to separate or thermal sensitive.
The key advantage of wire gauze structured packing is the high separation efficiency even at very small liquid loads along with its low pressure drop and small liquid hold-up, making it very suitable for distillation of thermally sensitive products.
Specification
● Surface areas: 250 m2/m3, 500 m2/m3, 750 mm2/m3, 1000 m2/m3, 1200 m2/m3.
● Material: AISI304, AISI304L, AISI316, AISI316L, carbon steel, etc.
|
Packing type |
Specific surface area (m2/m3) |
Bulk density (kg/m3) |
Void volume (m3) |
Pressure drop per plate (Pa/n) |
HETP (mm) |
Theoretical plate number (m-1) |
F factor (m/s 0.5) |
Stage height (m) |
|
250 (AX) |
250 |
125 |
0.95 |
10-40 |
100 |
2.5-3 |
2.5-3.5 |
5 |
|
500 (BX) |
500 |
250 |
0.9 |
40 |
200 |
4-5 |
2.0-2.4 |
3-4 |
|
700 (CY) |
750 |
350 |
0.85 |
67 |
400-333 |
8-10 |
1.5-2.0 |
5 |
Features
Large specific surface area, high void ratio and light.
Obliquity of gas passage is small and regular, so pressure drop is low.
Good radial diffusion and sufficient gas contact.
Application
Metal wire gauze packing is used for Fine chemical, flavors factory, isomer separation. The separation of thermally sensitive materials, testing tower and the improvement of tower.
250 (AX) Precision rectification for high productive capacity and less theoretical plate number.
500 (BX) Vacuum rectification for thermo sensitive system and hard separation system, especially suitable for rectification with pressure lower than 7KPa.
700 (CY) Separation of isotopic compound and isomeric compound.
Wire gauze structured packing is not suitable for fouling services and strongly corrosive media.
Hot Tags: metal wire gauze packing for distillation column, China metal wire gauze packing for distillation column manufacturers, factory, Metal Super Raschig Ring Tower Packing, Metal Flat Ring Tower Packing, Metal Wire Gauze Packing for Distillation Column, Metal Cascade Mini Ring Tower Packing, Metal Pall Ring Tower Packing, Metal VSP Ring Tower Packing
