Products Introduction
Plastic Lanpack Rings for Tower Packing are the optimum component for high liquid load applications in tower packing. It is available in 2.3-inch and 3.5-inch sizes and in a variety of plastic materials including polypropylene, polyethylene, PVDF, and more. Through innovative geometric designs such as axisymmetric distribution, horizontal stripes and vertical stripes cross distribution. Lightweight, heat and chemical resistant, they are the best components for high liquid load applications in column packing. Has an excellent performance record in this field. Lanpac column packing media promotes continuous droplet formation throughout the packed bed, providing maximum surface contact between exhaust gas and scrubbing liquid. Lanpac column packing media offers significantly lower pressure drop and more efficient transfer than other smaller packings. Optimum component for high liquid load applications in column packing. Has an excellent performance record in this field. For extraction of groundwater for gas extraction; for aeration in the chemical industry to remove H2S; for removal of carbon dioxide for corrosion control; in scrubbers with high liquid throughput (less than 10 gpm/ft2).
Lanpack tower packing media is uniquely engineered to provide maximum surface contact between exhaust gases and scrubbing liquid by facilitating continuous formation of droplets throughout the packed media bed.
Innovatively Geometric design, axisymmetric distribution, the horizontal stripes & vertical bar cross distribution is Lanpack’s outstanding feature. Lanpack tower packing media is uniquely engineered to provide maximum surface contact between exhaust gases and scrubbing liquid by facilitating continuous formation of droplets throughout the packed media bed.

Specification
|
Size (inch) |
Surface area (m2/m3) |
Void Fraction |
Numbers/m3 |
Bulk weight |
Dry packing factor (m-1) |
|
3.5" |
144 |
92.5 % |
1770 |
4.2 lb/ft3 67 kg/m3 |
46/m2 |
|
2.3" |
222 |
89 % |
7060 |
6.2 lb/ft3 99 kg/m3 |
69/m2 |
|
Above spec is base on PP material. |
|||||
1. The plastic lanpack ring packing is used in the acid regeneration absorption system of steel mills, as well as in various special places such as pickling tanks, electrolytic cells, and storage tanks. Including washing tower, stripping tower, stripping tower; in steel mills (pickling, acid regeneration, acid mist), flue gas desulfurization, ionic membrane caustic soda and other pipeline systems. It is also widely used in chemical, pharmaceutical, food, environmental protection and other industries, especially suitable for deep purification of drinking water, waste water, waste gas treatment and extraction of precious metals, solvent recovery, etc.
2. Plastic lanpack packing is also used in stripping packed towers for removing PCE in groundwater.
3. The plastic lanpack packing is used to solve the problem of methanol/water distillation for pharmaceutical manufacturers. After applying the packing, the feeding speed can be doubled, the pressure drop can be reduced, and the mass transfer efficiency can be improved.
4. Plastic lanpack packing is used in paper mills to increase gas flow in pulp mill scrubbers by 40%, which can reduce clogging.
5. Plastic lanpack packing is used to remove PCE in groundwater stripping packed tower.
Hot Tags: plastic lanpack ring for tower packing, China plastic lanpack ring for tower packing manufacturers, factory, pp tellerette packing ring, Demister Mat, Plastic Intalox Saddle Ring Tower Packing, plastic tri pack, tri packs tower packing, Plastic Ralu Ring Tower Packing










