Products Introduction
Plastic saddle rings are a combination ring and saddle made of heat and chemical resistant plastics including polypropylene (PP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) and polyvinyl chloride Vinyl difluoride (PVDF). Compared with the Pall ring, the plastic saddle ring has lower resistance, larger flux, higher efficiency, good hardness and wide application. It has the characteristics of large gap, low pressure drop, low mass transfer unit height, small specific gravity, high mass transfer efficiency, high flooding point, and uniform gas-liquid contact. Its medium service temperature ranges from 60 to 280°C. Due to its low cost, it is widely used in packed towers in petroleum, chemical, alkali chlorination, gas, environmental protection and other industries. Improved separation efficiency and reduced energy consumption.
The shape of the Intalox Saddle Ring is a combination of the ring and the saddle, which benefits the advantages of the two. This structure helps liquid distribution and enlarges the quantities of gas holes. The Intalox Saddle Ring has less resistance, bigger flux and higher efficiency than the Pall Ring. It is one of the most widely used packing with good hardness. It has low pressure, big flux and high efficiency of mass transfer, and it is easy to manipulate.
Technical Specification
|
Product name |
Plastic super intalox saddle |
|||||
|
Material |
PP / RPP / PVC / CPVC / PVDF, etc. |
|||||
|
Life span |
>3 years |
|||||
|
Size (inch/mm) |
Surface area (m2/m3) |
Void volume (%) |
Packing number (pieces/m3) |
Packing density (Kg/m3) |
Dry packing factor (m-1) |
|
|
1" |
25 × 12.5 × 1.2 |
260 |
90 |
51200 |
92 |
390 |
|
1-1/2" |
38 × 19 × 1.2 |
178 |
96 |
25200 |
75 |
201 |
|
2" |
50 × 25 × 1.5 |
168 |
97 |
6300 |
76 |
184 |
|
3" |
76 × 38 × 2.6 |
130 |
98 |
3700 |
64 |
138 |
|
Feature |
High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. |
|||||
|
Advantage |
1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. |
|||||
|
2. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload. |
||||||
|
Application |
These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 280°. |
|||||
Cost-effective Plastic Intalox Saddle for Absorption
Plastic intalox saddle is also called plastic intalox saddle ring. It is a popular random packing in intalox saddles field. Plastic intalox saddle ring has a smooth arc surface. Its arc-shaped design increases the contiguous porosity among the packing in the packed layers. This kind intalox saddle skillfully combines the advantages of ring-type and saddle-type packing. It integrates the former's large flux capacity and the latter's good liquid distribution performance.
Plastic intalox saddle has superior performance. It has high mass transfer rate, good gas-liquid separation efficiency and low operating cost. This product largely increases the separation efficiency and greatly reduces the energy consumption. Compared with metal intalox saddle, it has better elasticity and lower cost. This kind intalox saddle is easy to operate, it is suitable for various packed towers, such as drying tower, absorption tower and cooling tower.
PIS-01: The arc surface design of plastic intalox saddle effectively avoids overlapping in the packed bed.
PIS-02: Due to its special material, plastic intalox saddle has good chemical corrosion resistance.
Specifications
Material: PE (polyethylene), PP (polypropylene), RPP (reinforced polypropylene), PVC (polyvinyl chloride), CPVC (chlorinated polyvinyl chloride) and PVDF (polyvinylidene fluoride).
Lifespan: more than 3 years.
Package: plastic bags, cartons.
Technical Parameter
|
Item |
Size |
Surface Area |
Voidage |
Bulk Number |
Bulk Density |
Dry Packing Factor |
|
PIST-01 |
25 × 12.5 × 1.2 |
288 |
85% |
97680 |
102 |
473 |
|
PIST-02 |
38 × 19 × 1.2 |
265 |
95% |
25200 |
63 |
405 |
|
PIST-03 |
50 × 25 × 1.5 |
250 |
96% |
9400 |
75 |
323 |
|
PIST-04 |
76 × 38 × 2 |
200 |
97% |
3700 |
60 |
289 |
Features
Large flux.
Good loading elasticity.
Good stain resistance.
Strong corrosion resistance.
Easy operation.
Economical.
Applications
Used in the chlor-alkali industry, metallurgy industry and chemistry industry.
Applied in the absorption operation of desulfurization, decarbonization, nitric acid, nitrate.
Used in various packed towers, such as drying tower, absorption tower, scrubbing tower and cooling tower.
Hot Tags: plastic intalox saddle ring tower packing, China plastic intalox saddle ring tower packing manufacturers, factory, Plastic Intalox Saddle Ring Tower Packing, tellerette, tellerette ring, High Performance Tower Packing Plastic Hiflow Ring, Plastic Q Pack Scrubber Packing, plastic heilex ring
