Products Introduction
They occupy a small volume within the column and have a unique geometry that improves liquid retention compared to other types of random packing. Inner arcs increase the uninterrupted flow of gases and liquids while providing an additional drop point to enhance liquid film surface renewal for improved mass and heat transfer. The open structure is vertically open, and the inclined inner ring makes it easier for solids to wash through the bed, which can inhibit fouling and liquid stagnation.
Plastic Beta Ring
Plastic Beta Ring is made of heat-resistant and chemical-resistant plastic. The plastic packing material includes:
polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), and chlorinated polyvinyl chloride (CPVC) and tower packing made of polyvinylidene fluoride (PVDF). It has good corrosion resistance, large gap, large flux, low resistance, low energy consumption, low operating cost, light weight, easy loading and unloading, and reusable. It is especially suitable for medium and low temperature (60-280°C) stripping, absorption and washing towers in petroleum, chemical, chlor-alkali, gas, environmental protection and other industries.
Physical & chemical properties
|
Performace/Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
|
Density (g/cm3) (after injection molding) |
0.98 |
0.96 |
1.2 |
1.7 |
1.8 |
1.8 |
|
Operation Temp. (℃) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
|
Chemical Corrosion resistance |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
GOOD |
|
Compression Strength (Mpa) |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
>6.0 |
Technical data
|
Product Name |
Increasing Mass Transfer Efficiency Plastic Random Packing Beta Ring |
|
|
Model |
EYZL70427E2 |
|
|
Material |
PP / PE / PVC / RPP / CPVC |
|
|
Size (mm) |
Voidage (%) |
Bulk Weight (Kg/m³) |
|
25 |
94 |
53 kg/m³ 3.3lb/ft³ |
|
50 |
94 |
54 kg/³ 3.4lb/ft³ |
|
76 |
96 |
38 kg/m³ 2.4lb/ft³ |
|
Feature |
1. High vapor capacity and low pressure drop |
|
|
2. High efficiency |
||
|
3. Fouling resistant |
||
|
4. High liquid handing capacity |
||
|
Application |
1. Absorption and stripping services |
|
Products description
Plastic Beta Ring: It was invented by the Kochgrich company. The inner arc tongue will increase the uninterrupted flow of gas and liquid, while providing an additional drop point to enhance the surface renewal of the liquid film to improve the mass transfer efficiency. The open structure and the vertically inclined inner ring make the solids easier to be washed by liquids. Plastic Beta Ring has the characteristics of high porosity, low pressure drop, mass unit height, high flooding point, sufficient gas-liquid contact, small specific gravity, and high heat and mass transfer efficiency. Plastic Beta Ring packing is a very efficient random packing for chemical industry. Used for water vapor cooling tower, absorption tower and stripping device in separation device.
|
Product Name |
Plastic Beta Ring |
||
|
Material |
PP, PE, PVC, CPVC, RPP, PVDF and etc. |
||
|
Life Span |
>3 years |
||
|
Product name |
Diameter (mm/Inch) |
Void Volume (%) |
Packing Density (Kg/m3) |
|
Beta Ring |
25 (1") |
94 |
53kg/m³ (3.3lb/ft³) |
|
Beta Ring |
50 (2") |
94 |
54kg/m³ (3.4lb/ft³) |
|
Beta Ring |
76 (3") |
96 |
38kg/m³ (2.4lb/ft³) |
|
Feature |
1. Low aspect ratio increases capacity and reduces pressure drop. The preferred vertical orientation of the packing axes allows free gas flow through the packed bed. 2. Lower pressure drop than Pall rings and saddles. |
||
|
Advantage |
Open structure and preferred vertical orientation inhibits fouling by allowing solids to be more easily flushed through the bed by the liquid. Low liquid hold-up minimizes column inventory and liquid residence time. Strong resistance to chemical corrosion, large void space. energy saving, low operation cost and easy to be load and unload. |
||
|
Application |
These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 280°. |
||
Hot Tags: plastic beta ring tower packing, China plastic beta ring tower packing manufacturers, factory, Plastic Liquid Covering Ball for Water Treatment, tellerette packing, Plastic Beta Ring Tower Packing, Plastic Cascade Mini Ring Chemical Packing, 25 38 50 76 Mm Plastic Pall Ring Tower Packing, Tower Packing Water Treatment Plastic Igel Ball
