Products Introduction
The Ceramic Split Ring adds a minus spacer to the Ceramic Raschig Ring. It is a new type of ceramic filler developed based on the idea of increasing the surface area of the filter and improving the mass transfer efficiency. Its structure is to add a horizontal slotted separator to the Raschig ring. In general, larger size ceramic mini-rings (ranging from 80 mm to 200 mm) are often used as support packing at the bottom of packed columns. It is only suitable for neat stacking. At present, the word ring is generally used as a material layer with bottom support. Ceramics with a size of 80-150mm can be used to support the inline ring material, and the porosity is greater than 60%. It has acid and alkali resistance. High throughput. low pressure drop. High mass transfer efficiency. High compressive strength. Due to its large void ratio, it is mostly used as a tower filler in applications, and as a heat transfer medium in RTO. This product has been calcined for 24 hours, and the sintering temperature is above 1000°C. It is an inert product.
Ceramic mini lessing ring is used as supporting materials in packed towers
Ceramic mini lessing ring is an advanced products based on ceramic raschig ring. It added the Minus partition on the ceramic raschig ring.
The larger size ceramic mini lessing ring (ranging from 80 mm to 200 mm) is commonly be used as supporting packing on the bottom of packed column.
Features & Benefits
Acid and alkali resistance.
Large flux.
Low pressure drop.
High mass transfer efficiency.
High compressive strength.
Large voidage.
Applications
Ceramic mini lessing ring can be used in drying towers of chemical, metallurgy, gas, and environmental protection industries.
Ceramic mini lessing ring is widely used as supporting material at the bottom of packed tower.
Ceramic Mini Lessing Ring is improved by ceramic raschig ring, with better surface area and compressive strength than raschig ring, with excellent acid resistance and heat resistance. They can resist to corrosion of various inorganic acids, organic acids and organic solvents except hydrofluoric acid, and can be used in high or low temperature conditions. Consequently their application ranges are very wide. Ceramic Mini Lessing Ring can be used in the drying columns, absorbing columns, cooling towers, scrubbing towers in chemical industry, metallurgy industry, coal gas industry, oxygen producing industry, As tower packing in mass transfer application, As heat transfer media in RTO, etc. This products all after calcination 24 hours, sintering temperature is more than 1000℃ is inert products.
Product specifications
|
Size |
D*H*T (mm) |
Bulk density (kg/m3) |
Number per (m3) |
Surface area (m2/m3) |
F factor (m-1) |
|
2" (50mm) |
50*50*5 |
600 |
6400 |
145 |
565 |
|
3" (80mm) |
80*80*5 |
820 |
1950 |
120 |
356 |
|
4" (100mm) |
100*100*10 |
850 |
1000 |
110 |
252 |
|
5" (120mm) |
120*120*12 |
860 |
370 |
75 |
146 |
|
6" (150mm) |
150*150*15 |
980 |
295 |
60 |
101 |
Common Specifications
|
Item |
Sizes (inch/mm) |
OD × ID × H × T (mm) |
Bulk Density (kg/m3) |
Bulk Numbers (pcs/m3) |
Surface Area (m2/m3) |
Dry Packing Factor (m-1) |
|
CMLR-01 |
3/8"/10 |
10 × 6 × 8 × 2 |
800 |
750000 |
420 |
1250 |
|
CMLR-02 |
2"/50 |
50 × 40 × 50 × 5 |
600 |
6500 |
145 |
565 |
|
CMLR-03 |
3.2"/80 |
80 × 64 × 80 × 8 |
820 |
1950 |
120 |
356 |
|
CMLR-04 |
4"/100 |
100 × 80 × 100 × 10 |
850 |
1000 |
110 |
252 |
|
CMLR-05 |
5"/120 |
120 × 96 × 120 × 12 |
860 |
370 |
75 |
146 |
|
CMLR-06 |
6"/150 |
150 × 120 × 150 × 15 |
980 |
296 |
60 |
101 |






Hot Tags: ceramic mini lessing ring tower packing, China ceramic mini lessing ring tower packing manufacturers, factory, Ceramic Mini Lessing Ring Tower Packing, Ceramic Y Type Partition Ring Tower Packing, Ceramic Pall Ring Tower Packing, Ceramic Cascade Mini Ring Tower Packing, Ceramic Cross Ring Tower Packing, Ceramic Raschig Ring Tower Packing









